Displaying Location Information Using GPS

Displaying Location Information Using GPS
If you are making a One Port Insertion Loss measurement, you can use GPS Location data to verify your location. For additional information on the GPS Data function, refer to "Displaying GPS Location Data"
To Display GPS Location Information:

Step
Notes

1
[Level/Location]

2
On [Show GPS Location] select On.
Displays GPS satellite location information. Uses the internal GPS to capture the location at which a measurement is made. The GPS information can be used to return to the same location. The Time Ref (Freq/Chan/Time Ref mode) button must be set to Internal GPS for this function to be active. Information logged includes longitude, latitude, altitude (feet/meters), and the number of satellites tracked.
Each time you press this softkey, the selected option changes.

3
Highlight [On]
Toggle to [On] to display GPS satellite location information. Toggle to [Off] to remove the location information

NOTE: If you prefer to have an electronic copy of the location information, see "Saving Data"


	Step	Notes
1	[Level/Location]
2	On [Show GPS Location] select On.	Displays GPS satellite location information. Uses the internal GPS to capture the location at which a measurement is made. The GPS information can be used to return to the same location. The Time Ref (Freq/Chan/Time Ref mode) button must be set to Internal GPS for this function to be active. Information logged includes longitude, latitude, altitude (feet/meters), and the number of satellites tracked. Each time you press this softkey, the selected option changes.
3	Highlight [On]	Toggle to [On] to display GPS satellite location information. Toggle to [Off] to remove the location information