Optional 1xEV-DO Tx and Over Air Analyzer Measurement Settings

---

You can change several optional measurement parameters in the 1xEV-DO Tx and Over Air Analyzer:

• "Setting the Channel or Frequency Step"
• "Setting the PN Offset"
• "Setting the PN Increment"
• "Setting the Active Channel Threshold Level and Auto Threshold Level"
• "Setting the Frequency/Time Reference"
• "Setting Units"
• "Setting the 1xEV-DO Transmitter Reference Level"
• "Setting Measurement Time"
• "Setting Measurement Offset"
• "Setting the Slot Threshold Level"
• "Setting the CDP Type"
• "Setting the Pilot Dominance Limit"
• "Setting the Multipath Power Limit"
• "Setting the PN Scanner Sensitivity"
• "Setting Average, Sweep, and Restart"
• "Adding a Marker"
• "Setting the Pass/Fail Limits"