Setting Measurement Time

The measurement time setting allows you to alter the speed at which measurements are made. Three choices exist: Slow, Medium, and Fast. The test set defaults to Medium. Slow measurement time provides a more repeatable measurement at the expense of time, and is done by increasing the number of slots that are measured. Fast measurement time provides a quicker measurement at the expense of repeatablity, and is done by decreasing the number of slots that are measured. Medium measurement time strikes a balance between measurement speed and repeatability.
Meas Time Setting
 		CDP & Rho Measurement Interval
 		Data Channel Modulation Measurement Interval
 		RF Metric Measurement Interval
Fast
 		3 full slots
 		3 full slots
 		16 full slots
Med
 		6 full slots
 		6 full slots
 		32 full slots
Slow
 		9 full slots
 		9 full slots
48 full slots

To Set the Measurement Time:

Step
 		Notes
1
 		[Setup]
2
 		On [Meas Time] select Slow, Med, or Fast.
 		Each time you press this softkey, the selected option changes.