Setting the CDP Type

Setting the CDP Type
The CDP Type parameter is used to specify whether you are despreading Pilot, MAC 64, or MAC 128 codes when you are performing your measurement.

NOTE: Rev 0 of the 3GPP2 (Third Generation Partnership Project 2) standards requires 64 MAC codes to be despread; Rev A requires that 128 MAC codes are despread.

To Set the CDP Type:

Step
Notes

1
[Setup]

2
Press [CDP Type].

3
Press the correct CDP Type key.
There are three CDP Type options available to you. These are Pilot, MAC 64, and MAC 128


	Step	Notes
1	[Setup]
2	Press [CDP Type].
3	Press the correct CDP Type key.	There are three CDP Type options available to you. These are Pilot, MAC 64, and MAC 128