Setting the PN Scanner Sensitivity

---

PN Scanner Sensitivity determines the noise floor for the OTA PN Scanner. You can select from three sensitivity levels-Low, Medium, or High. Setting the sensitivity to High will result in a lower noise floor but will descrease the measurement speed. Setting the sensitivity to Low will result in a higher noise floor and decreased measurement speed.
PN Scanner Sensitivity is coupled to the OTA PN Scanner. If the OTA PN Scanner is Off, the PN Scanner Sensitivity is disabled; if OTA PN Scanner is On, PN Scanner Sensitivity is automatically enabled.
To Set the PN Scanner Sensitivity:

	Step	Notes
1	[Setup]
2	Press [PN Scanner Sensitivity].	Each time you press this softkey, the selected option changes. Select High, Medium, or Low.