Adding a Marker

Adding a Marker
Markers can be used on the CDP display to help you visually track up to four signals. Each marker has the following settings:
Type: Provides three options, including:
Off
Normal, which places a diamond-shaped, colored marker, along with a number, 1-4, on the CDP display.
Delta, is associated with a normal marker. Therefore, a normal marker must exist prior to creating the delta marker. The delta marker displays the difference between the normal marker position and the delta marker position. Only one delta marker can be associated with a given normal marker. The normal marker must be active when Delta is selected.
Marker to Peak: Places the active marker on the current greatest value of the CDP display.
Marker to Next Peak: Places the active marker on the current second greatest value of the CDP display.

Step
Notes

1
[Marker]

2
[Marker]

3
[1], [2], [3], or [4]

4
[Type]

5
[Off], [Normal], or [Delta]

6
Locate the marker relative to the code domain plots:

[Marker to Peak] or
[Marker to Next Peak]


	Step	Notes
1	[Marker]
2	[Marker]
3	[1], [2], [3], or [4]
4	[Type]
5	[Off], [Normal], or [Delta]
6	Locate the marker relative to the code domain plots: [Marker to Peak] or [Marker to Next Peak]