Setting the Measurement Time Offset Limits

Setting the Measurement Time Offset Limits

Step
Notes

1
On [Time Offset Limits] select On or Off.
Enables you to toggle the measurement limits function On (active) and Off (inactive).

If set to On, the displayed time offset metrics will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured values exceed the upper limit or falls below the the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'.
If set to Off, the time offset value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

2
Set the upper limit.

[High Limit]
Enter the number on the numeric keypad.
[msec]

3
Set the lower limit.

[Low Limit]
Enter the number on the numeric keypad.
[msec]


	Step	Notes
1	On [Time Offset Limits] select On or Off.	Enables you to toggle the measurement limits function On (active) and Off (inactive). If set to On, the displayed time offset metrics will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured values exceed the upper limit or falls below the the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'. If set to Off, the time offset value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
2	Set the upper limit. [High Limit] Enter the number on the numeric keypad. [msec]
3	Set the lower limit. [Low Limit] Enter the number on the numeric keypad. [msec]