Setting the Idle On/Off Ratio Limits

Setting the Idle On/Off Ratio Limits

Step
Notes

1
Press [On/Off Ratio Limits].

2
Press [Limits].
Enables you to toggle the Idle On/Off Ratio Limits function On (active) and Off (inactive).

If set to On, the displayed On/Off Ratio metric will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured value exceeds the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'.
If set to Off, the Idle Power and Non Idle Power values will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

3
Set the lower limit.

[Low Limit]
Enter the number on the numeric keypad.
[Enter]
Lower Limit range: -200 to 200 dB


	Step	Notes
1	Press [On/Off Ratio Limits].
2	Press [Limits].	Enables you to toggle the Idle On/Off Ratio Limits function On (active) and Off (inactive). If set to On, the displayed On/Off Ratio metric will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured value exceeds the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'. If set to Off, the Idle Power and Non Idle Power values will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
3	Set the lower limit. [Low Limit] Enter the number on the numeric keypad. [Enter]	Lower Limit range: -200 to 200 dB