Setting the Estimated Pilot Rho Lower Limits

Setting the Estimated Pilot Rho Lower Limits

Step
Notes

1
Press [Pilot Rho Limit].

2
Press [Limits].
Enables you to toggle the Estimated Pilot Rho measurement's lower limit function On (active) and Off (inactive).

If set to On, the displayed Estimated Pilot Rho metrics will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured value falls below the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'.
If set to Off, the Estimated Pilot Rho value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

3
Set the lower limit.

[Low Limit]
Enter the number on the numeric keypad.
[Enter]
Lower Limit range: 0 to 1


	Step	Notes
1	Press [Pilot Rho Limit].
2	Press [Limits].	Enables you to toggle the Estimated Pilot Rho measurement's lower limit function On (active) and Off (inactive). If set to On, the displayed Estimated Pilot Rho metrics will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured value falls below the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'. If set to Off, the Estimated Pilot Rho value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
3	Set the lower limit. [Low Limit] Enter the number on the numeric keypad. [Enter]	Lower Limit range: 0 to 1