Setting the Estimated MAC Rho Lower Limit

Setting the Estimated MAC Rho Lower Limit

Step
Notes

1
Press [Est MAC Rho Limit].

2
Press [Limits].
Enables you to toggle the Estimated MAC Rho measurement's lower limit function On (active) and Off (inactive).

If set to On, the displayed Estimated MAC Rho metrics will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured value falls below the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'.
If set to Off, the Estimated MAC Rho value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

3
Set the lower limit.

[Low Limit]
Enter the number on the numeric keypad.
[Enter]
Lower Limit range: 0 to 1


	Step	Notes
1	Press [Est MAC Rho Limit].
2	Press [Limits].	Enables you to toggle the Estimated MAC Rho measurement's lower limit function On (active) and Off (inactive). If set to On, the displayed Estimated MAC Rho metrics will change from blue to red (fail), or to green (pass), and will indicate either "P" (pass) or "F" (fail). If the measured value falls below the lower limit, the words 'ALL PASS' in the bar at the bottom of the screen will change to 'FAILURE'. If set to Off, the Estimated MAC Rho value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
3	Set the lower limit. [Low Limit] Enter the number on the numeric keypad. [Enter]	Lower Limit range: 0 to 1