Setting Source Level

Setting Source Level
Source level enables you to set the output level of the internal source at the RF Out/SWR connector. You may enter a value from -100 dBm to +10 dBm.
To Set the Source Level:

Step
Notes

1
[Setup]

2
On [Source Lev] select Manual.
Each time you press this softkey, the selected option changes.

3
Enter the output level of the internal source using the numeric keypad, the up and down arrow keys, or the knob.

4
[dB]


	Step	Notes
1	[Setup]
2	On [Source Lev] select Manual.	Each time you press this softkey, the selected option changes.
3	Enter the output level of the internal source using the numeric keypad, the up and down arrow keys, or the knob.
4	[dB]