Setting the Control Units

Setting the Control Units
In some instances you may be provided specifications by engineering in either dBm or watts. You can switch between the two units in order to make it easier to interpret measurement results.
To Change Units on the Y-Axis:

Step
Notes

1
[Level/Location]

2
[Units]
Each time you press this softkey, the selected option changes.

3
[dBm] or [Watts]
There is no change made to the Y-axis. The change is to the units for entry. The reference level changes on the graph, but not the axis labels.


	Step	Notes
1	[Level/Location]
2	[Units]	Each time you press this softkey, the selected option changes.
3	[dBm] or [Watts]	There is no change made to the Y-axis. The change is to the units for entry. The reference level changes on the graph, but not the axis labels.