Making a Basic Adjacent Channel Power Measurement


Step
 		Notes
1
 		Select Adjacent Channel Power.
  • Mode
  1. [Spectrum Analyzer/Tools]
  2. [Adjacent Channel Power]

2
 		Select the channel standard.
  1. [Chan Std]
  2. Select the standard using the up and down arrow buttons.
  3. [Select]

3
 		On [Units] select Chan.
 		Each time you press this softkey, the selected option changes. (The instructions in this manual show selections for Channel.)
4
 		Setup the frequency/channel you want to view.
  1. [Freq/Chan]
  2. [Channel]
  3. Enter the number on the numeric keypad.
  4. [Fwd] or [Rev]

5
 		Connect to the base station.

6
 		Set the level/location.
  1. [Level/Location]
  2. [Autoscale]
  3. [Select]
If the adjacent channel power trace is not visible, you can change the reference level or use Autoscale to have the test set select a reference level for you.