Setting the Measurement Carrier Feedthrough Upper Limit

Setting the Measurement Carrier Feedthrough Upper Limit

Step
Notes

1
On [Carr Feed-
thru Limit] select On or Off.
Enables you to toggle the measurement limits function On (active) and Off (inactive).

If set to On, the displayed carrier feedthrough metric will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured value exceeds the upper limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE.
If set to Off, the time carrier feedthrough value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

2
Set the upper limit.

[High Limit]
Enter the number on the numeric keypad.
[dBc]
Upper Limit range: +100 dBc to -150 dBc


	Step	Notes
1	On [Carr Feed- thru Limit] select On or Off.	Enables you to toggle the measurement limits function On (active) and Off (inactive). If set to On, the displayed carrier feedthrough metric will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured value exceeds the upper limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE. If set to Off, the time carrier feedthrough value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
2	Set the upper limit. [High Limit] Enter the number on the numeric keypad. [dBc]	Upper Limit range: +100 dBc to -150 dBc