Setting the Measurement Pilot Power Limits


Step
 		Notes
1
 		On [Pilot Power Limits] select On or Off.
Enables you to toggle the measurement limits function On (active) and Off (inactive).
  • If set to On, the delta pilot power metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured value exceeds the upper limit or lower limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE.
  • If set to Off, the time pilot power value will be displayed in blue. If NO limits are set to On, the pass/fail bar will not be displayed at the bottom of the screen.
2
 		Set the upper limit.
  1. [High Limit]
  2. Enter the number on the numeric keypad.
  3. [dBm]
Delta Limit range: -150 to 100 dBm
3
 		Set the lower limit.
  1. [Low Limit]
  2. Enter the number on the numeric keypad.
  3. [dBm]
Delta Limit range: -150 to 100 dBm