Setting the Measurement Time Offset Limits

Setting the Measurement Time Offset Limits

Step
Notes

1
On [Time Offset Limits] select On or Off.
Enables you to toggle the measurement limits function On (active) and Off (inactive).

If set to On, the displayed time offset metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured values exceed the upper or lower limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE.
If set to Off, the time offset value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

2
Set the upper limit.

[High Limit]
Enter the number on the numeric keypad.
[msec]

3
Set the lower limit.

[Low Limit]
Enter the number on the numeric keypad.
[msec]


	Step	Notes
1	On [Time Offset Limits] select On or Off.	Enables you to toggle the measurement limits function On (active) and Off (inactive). If set to On, the displayed time offset metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured values exceed the upper or lower limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE. If set to Off, the time offset value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
2	Set the upper limit. [High Limit] Enter the number on the numeric keypad. [msec]
3	Set the lower limit. [Low Limit] Enter the number on the numeric keypad. [msec]