Setting the Measurement Estimated Rho Lower Limit

Setting the Measurement Estimated Rho Lower Limit

Step
Notes

1
On [Est. Rho Limit] select On or Off.
Enables you to toggle the measurements lower limit function On (active) and Off (inactive).

If set to On, the displayed estimated Rho metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured values exceed lower limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE.
If set to Off, the time estimated Rho value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

2
Set the lower limit.

[Low Limit]
Enter the number on the numeric keypad.
[Enter]
Lower Limit range: 0 to 1


	Step	Notes
1	On [Est. Rho Limit] select On or Off.	Enables you to toggle the measurements lower limit function On (active) and Off (inactive). If set to On, the displayed estimated Rho metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured values exceed lower limit, ALL PASS, in the bar at the bottom of the screen, will change to FAILURE. If set to Off, the time estimated Rho value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
2	Set the lower limit. [Low Limit] Enter the number on the numeric keypad. [Enter]	Lower Limit range: 0 to 1