Setting the Measurement Noise Floor Upper Limit

Setting the Measurement Noise Floor Upper Limit

Step
Notes

1
On [Noise Floor Limits] select On or Off.
Enables you to toggle the measurement limit function On (active) and Off (inactive).

If set to On, the displayed noise floor metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured value exceeds the upper limit, the words 'ALL PASS', in the bar at the bottom of the screen, will change to 'FAILURE'.
If set to Off, the time noise floor value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.

2
Set the upper limit.

[High Limit]
Enter the number on the numeric keypad.
[dB]
Upper Limit range: 60 to -150 dBc


	Step	Notes
1	On [Noise Floor Limits] select On or Off.	Enables you to toggle the measurement limit function On (active) and Off (inactive). If set to On, the displayed noise floor metrics will change from blue to red (fail) or green (pass) and indicate either a "P" (pass) or "F" (fail). If the measured value exceeds the upper limit, the words 'ALL PASS', in the bar at the bottom of the screen, will change to 'FAILURE'. If set to Off, the time noise floor value will be displayed in blue. The bar at the bottom of the screen will indicate measurement in progress.
2	Set the upper limit. [High Limit] Enter the number on the numeric keypad. [dB]	Upper Limit range: 60 to -150 dBc