Displaying Frequency or Power

Displaying Frequency or Power
You can display frequency or power values above the bars in the trace display. The displayed frequency is the average instantaneous frequency when the signal is active.
For CDMA type signals, the frequency option is not recommended; accurate frequencies for CDMA are not displayed.

Step
Notes

1
[Setup]

2
On [Display Value] select Off, Freq, or Pwr.
Each time you press this softkey, the selected option changes. Choosing Off displays no values above the bars.


	Step	Notes
1	[Setup]
2	On [Display Value] select Off, Freq, or Pwr.	Each time you press this softkey, the selected option changes. Choosing Off displays no values above the bars.