Setting Noise Correction

Setting Noise Correction
You can turn the Noise Correction function On or Off. When set to On, noise correction will be activated and correct for the noise generated internally by the analyzer. It allows the you to make accurate measurements on signals close to the noise floor.
To Set the Measurement Noise Correction:

Step
Notes

1
[Setup]

2
On [Noise Correction] select On or Off.
Each time you press this softkey, the selected option changes.


	Step	Notes
1	[Setup]
2	On [Noise Correction] select On or Off.	Each time you press this softkey, the selected option changes.