Entering the Channels with a List Instead of a Range

Entering the Channels with a List Instead of a Range

Step
Notes

1
Select Channel Scanner.

Mode

[Spectrum Analyzer/Tools]
[Channel Scanner]

2
Select the channel standard.

[CS Chan Std]
Select the standard using the up and down arrow buttons.
[Select]

3
On [CS Units] select Chan.
Each time you press this softkey, the selected option changes.

4
On [Scan Mode] select List.
Each time you press this softkey, the selected option changes.

5
View or modify your list of channels.

[List]
[Ok]
View (and modify if necessary) your list of channels.

6
Enter channels into the list.

Use [Insert Row] to add a channel, then enter its number using the numeric keypad and [Fwd] or [Rev] to complete each entry.
Use [Delete Row] to remove channels you do not want displayed. Select a channel you want to remove using the up and down arrow buttons. Then press [Delete Row] to remove the selected channel.
[Ok]


	Step	Notes
1	Select Channel Scanner. Mode [Spectrum Analyzer/Tools] [Channel Scanner]
2	Select the channel standard. [CS Chan Std] Select the standard using the up and down arrow buttons. [Select]
3	On [CS Units] select Chan.	Each time you press this softkey, the selected option changes.
4	On [Scan Mode] select List.	Each time you press this softkey, the selected option changes.
5	View or modify your list of channels. [List] [Ok]	View (and modify if necessary) your list of channels.
6	Enter channels into the list. Use [Insert Row] to add a channel, then enter its number using the numeric keypad and [Fwd] or [Rev] to complete each entry. Use [Delete Row] to remove channels you do not want displayed. Select a channel you want to remove using the up and down arrow buttons. Then press [Delete Row] to remove the selected channel. [Ok]