Adding a Marker

Adding a Marker
Markers can be used on traces to help you visually track up to four signals. Each marker has the following settings:
Type: Provides three options, including:
Off
Normal, which places a diamond-shaped, colored marker, along with a number, 1-4, on the trace.
Delta, is associated with a normal marker. Therefore, a normal marker must exist prior to creating the delta marker. The delta marker displays the difference between the normal marker position and the delta marker position. Only one delta marker can be associated with a given normal marker. The normal marker must be active when Delta is selected.
Marker to Peak: Places the active marker on the current greatest value of the trace.
Marker to Next Peak: Places the active marker on the current second greatest value of the trace.
Marker to Min: Places the active marker on the current lowest value of the trace.
Marker to Next Min: Places the active marker on the current second lowest value of the trace.

Step
Notes

1
[Marker]

2
[Marker]
Each time you press the [Marker] key, you will step to the next marker in the sequence 1 - 2 - 3 - 4 - 1 - 2, and so on.

3
[1], [2], [3], or [4]

4
[Type]

5
[Off], [Normal], or [Delta]

6
Locate the marker relative to the trace:
[Marker to Peak] or [Marker to Next Peak] or [Marker to Min] or [Marker to Next Min]
This feature is available for both normal markers and for delta markers.


	Step	Notes
1	[Marker]
2	[Marker]	Each time you press the [Marker] key, you will step to the next marker in the sequence 1 - 2 - 3 - 4 - 1 - 2, and so on.
3	[1], [2], [3], or [4]
4	[Type]
5	[Off], [Normal], or [Delta]
6	Locate the marker relative to the trace: [Marker to Peak] or [Marker to Next Peak] or [Marker to Min] or [Marker to Next Min]	This feature is available for both normal markers and for delta markers.