Setting the Pass/Fail Limits

The measurement limits setting enables you to alter the value of the upper limit. Limits are set in dB and are relative. The setting you choose defines the location of the limit line displayed on the screen. The setting affect the metrics color display: red represents fail, green represents pass.
 To Set the Measurement Upper and Lower Limits:

Step
 		Notes
1
 		[Setup]
2
 		[Limits]

3
 		On [Limits] select On or Off.
 		Enables you to toggle the measurement limits function On (active) and Off (inactive).
  • If set to On, a limit line is displayed on the screen. Any measured value that exceeds the limit will result in a failure indication for that value.
  • If set to Off, neither a limit line nor a limit indicator are displayed. Also, the pass fail indicator is not shown in the metrics display portion of the display.
4
 		Set the upper limit.
  1. [Upper Limit]
  2. Enter the number on the numeric keypad.
  3. [dB]
Maximum Upper limit: Ref Level (top of display)
Minimum Upper limit: bottom of display