GSM and EDGE Analyzer

To move among topics, press the up arrow and down arrow menu keys on the right.power vs.
To view a topic, press the [Goto...] menu keys.

• "Using the GSM Analyzer and the EDGE Analyzer"
• "Performing a Basic GSM or EDGE Transmitter Measurement"
• "Interpreting the Display"
• "Optional GSM and EDGE Tx Analyzer Measurement Settings"
• "Setting your Scan Mode"
• "Setting the Start Frequency/Channel"
• "Setting the Frequency or Channel Step Size"
• "Setting the Stop Frequency/Channel"
• "Setting the Channel Standard"
• "Setting the Units of Measure for the Graphical Display"
• "Setting Autoscale"
• "Setting the Reference Level"
• "Setting Scale/Division"
• "Using GPS for Frequency Reference and Location Information"
• "Setting the Display Position"
• "Setting Auto Order"
• "Setting Bar Top and Units"
• "Setting Mid-Bar"
• "Setting Zoom"
• "Setting Zoom Offset"
• "Setting Zoom Interval"
• "Setting PvT Mask"
• "Setting Auto Mode Bar Count"
• "Setting Slot Synchronization"
• "Setting TS# (w/ BCCH)"
• "Setting the Pass/Fail Limits"
• "Adding a Marker"
• "Compensating for the Loss of an External Cable and Attenuator"
• "Setting Average, Sweep, and Restart"
• "GSM and EDGE Modulation and Band Information"
• "Metrics Provided by the GSM and EDGE Analyzer Measurement"
• "Interpretation of GSM and EDGE Analyzer Measurement Results"