Setting the Units of Measure for the Graphical Display

Setting the Units of Measure for the Graphical Display
You can set your analyzer to display the graphical measurement results in either absolute frequency or in channel numbers. This setting also determines whether frequency or channel number is displayed on the following keys:
Start Freq
Step Size
Stop Freq or Stop Chan
To Set the Units:

Step
Notes

1
[Freq/Chan]

2
[Units]
Each time you press this menu key, the selected option changes.
Note and verify that the correct unit of measure (either frequency or channel number) is displayed on the X-axis beneath the graphics on the screen (Channel Scanner view only), and on the keys listed above.

NOTE: If the relevant frequencies on your display do not correspond to a valid channel number in the channel plan of the GSM or EDGE standard you have selected, both the graphics display and the key labels will show a "?". For more details on setting channel standards, see "Setting the Channel Standard"


	Step	Notes
1	[Freq/Chan]
2	[Units]	Each time you press this menu key, the selected option changes. Note and verify that the correct unit of measure (either frequency or channel number) is displayed on the X-axis beneath the graphics on the screen (Channel Scanner view only), and on the keys listed above.