Using GPS for Frequency Reference and Location Information

Using GPS for Frequency Reference and Location Information
You can use GPS Location data to verify your location and to provide an accurate frequency reference.
To Display GPS Location Information:

Step
Notes

1
[Level/Location]

2
On [Show GPS Location] select On.
Displays GPS satellite location information. Uses the internal GPS to capture the location at which a measurement is made. The GPS information can be used to return to the same location. The Time Ref (Freq/Chan/Time Ref mode) button must be set to Internal GPS for this function to be active. Information logged includes longitude, latitude, altitude (feet/meters), and the number of satellites tracked.
Each time you press this menu key, the selected option changes.

3
Highlight [On]
Toggle to [On] to display GPS satellite location information. Toggle to [Off] to remove the location information.


	Step	Notes
1	[Level/Location]
2	On [Show GPS Location] select On.	Displays GPS satellite location information. Uses the internal GPS to capture the location at which a measurement is made. The GPS information can be used to return to the same location. The Time Ref (Freq/Chan/Time Ref mode) button must be set to Internal GPS for this function to be active. Information logged includes longitude, latitude, altitude (feet/meters), and the number of satellites tracked. Each time you press this menu key, the selected option changes.
3	Highlight [On]	Toggle to [On] to display GPS satellite location information. Toggle to [Off] to remove the location information.