Setting Bar Top and Units

Setting Bar Top and Units
You can set the channel power to be displayed (in dBm or watts) at the top of the channel bars. This only affects the power displayed on the top of the bars. The vertical scale of the graph does not change.
This setting is only available when View is set to Channel Scanner.
To Set Bar Top:

Step
Notes

1
[Display]

2
On [Bar Top] select Off or Pwr.
Each time you press this menu key, the selected option changes.

2
On [Units] select dBm or Watts.
Each time you press this menu key, the selected option changes.


	Step	Notes
1	[Display]
2	On [Bar Top] select Off or Pwr.	Each time you press this menu key, the selected option changes.
2	On [Units] select dBm or Watts.	Each time you press this menu key, the selected option changes.