Setting Zoom

---

You can zoom into one or more of the eight slots in a channel, or you can zoom in further to look at just the rising and falling edges of a single slot. You use this Zoom setting to determine whether the analyzer displays the complete slot(s), or only the rising and falling edges.
If you select Zoom Rise/Fall to look at the rising and falling edges of a single slot, and your Zoom Interval is set to greater than one slot, the slot whose rising and falling edges are displayed is the slot corresponding to your Zoom Offset setting.
This setting is only available when View is set to Power versus Time.
For details on setting the Zoom Interval, see "Setting Zoom Interval"
For details on setting the Zoom Offset, see "Setting Zoom Offset"
To Set Zoom:

	Step	Notes
1	[Display]
2	On [Zoom] select Slots or Rise/Fall.	Each time you press this menu key, the selected option changes.