Setting the Pass/Fail Limits

---

The measurement limits settings allow you to alter the values of a range of upper and lower test limits. All of these settings, with the exception of Channel Scanner Power, affect the metrics color display: red represents fail, green represents pass.
You can switch each measurement limit On or Off independently of all other limits. If one or more measurement limits is turned On, and they all pass, the summary text "ALL PASS" is displayed below the numerical results of the screen. If any limit test fails, the summary text "FAILURE" is displayed in the same area.

---

NOTE:

A pass or fail of the Channel Scanner Power Limit does not affect the summary status.

---

• "Setting Channel Scanner Power Limits"
• "Setting Frequency Error Limits"
• "Setting TS Power Limits"
• "Setting the I/Q Offset Limit"
• "Setting the RMS Phase Error Limit"
• "Setting the Peak Phase Error Limit"
• "Setting the RMS EVM Limit"
• "Setting the Peak EVM Limit"
• "Setting the 95th Percentile EVM Limit"