Setting the 95th Percentile EVM Limit

You can set an upper 95th Percentile Error Vector Magnitude Limit for your Measurement results.
 If 95%tile EVM Limit is turned On, and your measured 95th Percentile EVM is below the limit you have specified, the numeric results reported in the metrics portion of the screen will be displayed in green, and the Limit Pass will be indicated by "(P)" after the result. If your measured 95th Percentile EVM is above your specified limit, the numeric result reported in the metrics portion of the screen will be displayed in red, and the Limit Failure will be indicated by "(F)" after the results.
 To Set the Peak Phase Error Limit:

Step
 		Notes
1
 		[Setup]
2
 		[95%tile EVM Limits]

3
 		[Limits]

4
 		[On] or [Off]
5
 		Set the high limit.
  1. [High Limit]
  2. Enter the number on the numeric keypad.
  3. [%]