Optional GSM and EDGE Tx Analyzer Measurement Settings

---

You can change several optional measurement parameters in the GSM/EDGE Tx Analyzer:

• "Setting your Scan Mode"
• "Adding or Deleting a List Item"
• "Setting the Start Frequency/Channel"
• "Setting the Frequency or Channel Step Size"
• "Setting the Stop Frequency/Channel"
• "Setting the Channel Standard"
• "Setting the Units of Measure for the Graphical Display"
• "Setting Autoscale"
• "Setting the Reference Level"
• "Setting Scale/Division"
• "Using GPS for Frequency Reference and Location Information"
• "Setting the Display Position"
• "Setting Auto Order"
• "Setting Bar Top and Units"
• "Setting Mid-Bar"
• "Setting Zoom"
• "Setting Zoom Offset"
• "Setting Zoom Interval"
• "Setting PvT Mask"
• "Setting Auto Mode Bar Count"
• "Setting Slot Synchronization"
• "Setting TS# (w/ BCCH)"
• "Setting the Pass/Fail Limits"
• "Adding a Marker"
• "Compensating for the Loss of an External Cable and Attenuator"
• "Setting Average, Sweep, and Restart"