Setting the Channel or Frequency Step

W-CDMA or W-CDMA (with HSDPA) Analyzer Measurement Settings

Setting the Channel or Frequency Step
You can set the channel or frequency step so you can quickly increment to the next channel or frequency using the up and down arrow buttons.

Step
Notes

1
[Chan Step] or [Freq Step]
This choice depends on the [Units] mode you are using.

2
Enter the desired channel or frequency step using the numeric keypad.

3
[Enter]
Notice (and verify) the number you entered below the Chan Step or Freq Step text on the corresponding button.


	Step	Notes
1	[Chan Step] or [Freq Step]	This choice depends on the [Units] mode you are using.
2	Enter the desired channel or frequency step using the numeric keypad.
3	[Enter]	Notice (and verify) the number you entered below the Chan Step or Freq Step text on the corresponding button.