Setting Valid Measurement Limits

The Valid Measurement Setting allows you to set the Multipath Power and Pilot Dominance limits. These settings control will help the test set to determine if valid over the air measurements are being made.

Step
 		Notes
1
 		[Setup]
2
 		[Valid Meas Settings]

3
 		Set Multipath Power limit.
  1. [Mp Pwr <]
  2. Enter the power level using the numeric keypad.
  3. [dB]

4
 		Set Pilot Dominance limit.
  1. [Plt Dom >]
  2. Enter the power level using the numeric keypad.
  3. [dB]