Setting the S-CCPCH Parameters

Setting the S-CCPCH Parameters
The S-CCPCH (Secondary Common Control Physical Channel) Setting allows you enable S-CCPCH, set the spread factor, and designate the channel number. The S-CCPCH settings help the test set determine which channel is the S-CCPCH channel. Once the test set has identified this channel, it can perform the delta power measurements for this channel and display them to the you.

Step
Notes

1
[Setup]

2
[S-CCPCH]
This key displays the current Spread Factor, selected channel, and Enable /Disable status.

3
On [S-CCPCH Enable] select On or Off.
Each time you press this softkey, the selected option changes.

4
Set the Spread Factor.

[Spread Factor]
[4], [8], [16], [32], [64], [128], or [256].

5
Set the channel.

[Channel]
Enter the channel number using the numeric keypad.
[Enter]
Always enter the channel number even if you have set Units to Freq.


	Step	Notes
1	[Setup]
2	[S-CCPCH]	This key displays the current Spread Factor, selected channel, and Enable /Disable status.
3	On [S-CCPCH Enable] select On or Off.	Each time you press this softkey, the selected option changes.
4	Set the Spread Factor. [Spread Factor] [4], [8], [16], [32], [64], [128], or [256].
5	Set the channel. [Channel] Enter the channel number using the numeric keypad. [Enter]	Always enter the channel number even if you have set Units to Freq.