Adding a Marker
Markers can be used on traces to help you visually track up to four signals. Each marker has the following settings:
Type: Provides three options, including:
Off
Normal, which places a diamond-shaped, colored marker, along with a number, 1-4, on the trace.
Delta, is associated with a normal marker. Therefore, a normal marker must exist prior to creating the delta marker. The delta marker displays the difference between the normal marker position and the delta marker position. Only one delta marker can be associated with a given normal marker. The normal marker must be active when Delta is selected.
Marker to Peak: Places the active marker on the current greatest value of the trace.
Marker to Next Peak: Places the active marker on the next highest peak as measured from your current marker's position.
Marker to Next Active Ch Left: Places the active marker on the next active channel to the left of your current marker.
Marker to Next Active Ch Right: Places the active marker on the next active channel to the right of your current marker.
Step
Notes
1
[Marker]
2
[Marker]
3
[1], [2], [3], or [4]
4
[Type]
5
[Off], [Normal], or [Delta]
6
Locate the marker relative to the trace: